Structure of desander and desilter cyclone.

F1.1 Desander Cyclone

The structure and parts details of the desander cyclone are shown in picture F3 and form F3.
Structure diagram of desander cyclone


Рic. F3  Structure diagram of desander cyclone.


     No.

Part Name
 Part Number

Qty
 No.
 Part Name
 Part Number
     Qty
1
 Upper Cover         
TR10-CS-01A
1
6

Injector
TR10-CS-06A25
1
2
 Great Hoop      
TR10-CS-02A
1
TR10-CS-06A20
3
Big Cone
TR10-CS-03A
1
TR10-CS-06A15
4
  Small Clamp        
TR10-CS-04A
1
7

Nut 
TR10-CS-07A
1
5
Small Cone     
TR10-CS-05A
1
　
　
　
　

Form F3  List of assemblies for desander cyclone.

 F1.2  Desilter Cyclone

The structure and parts details of the desilter cyclone are shown in picture F4 and form F4.


Structure diagram of desilter cyclone.


Рic. F4 Structure diagram of desilter cyclone. 





No.
  Part Name
 Part Number
Qty
1
Upper Cover
TR04-CN-01A
1
2
Cone
TR04-CN-02A
1
 
Form F4  List of assemblies for desilter cyclone.

评论

发表评论

此博客中的热门博文

Construction Machinery Special,Molds,Injection Molding Machine for Bearings

Product Features No need to oil installations,the filling hole processing tank The cost of oil installations,processing fees,assembly fees,the extra cost and time savings can significantly reduce manufacturing costs. Lower operating costs Substantially reduce the use of lubricants and equipment maintenance costs,while also eliminating the risk caused due to insufficient oil supply. The shortening of design time Non-oil can make the design,structure,and greatly simplify and reduce costs,save design time and to obtain significant results,in addition,the use of self-lubricating bearings can also improve the mechanical properties and extend the service life and higher reliability. Lubricating oil recycling and environmental protection No need to waste oil recycling,are environmentally friendly. JBD(500#),self-lubricating bearing parts of the machinery industry,the use of certain generalized.In order to make the mechanical drive is operating normally,a lot of effort.The
阅读全文

TR Mud Agitator Installed In Drilling Field

图片
On October 10th, TR finished the production of 40 pcs  mud agitator  for African customer, and then delivered to their drilling field. Since client also required installation guidance both by texts and video, TR provided them altogether to client. Finally they completed installation in field at the end of November. For this project, mud agitators are 11kw coupling type agitators. Impeller has three layers, shaft  length is 2400mm. The upper impeller is 850mm, middle impeller is 800mm, and bottom impeller is 750mm. Furthermore, the reducer is a worm gear type with a speed ratio of 25:1. The impeller speed is 72r/min. TR mud agitator could maintain the uniformity of drilling fluid and suspend solid phase particles. At the same time, our agitator can stir drilling fluid continuously and reliably. We adopt cycloidal reducer below 5.5kW mud agitator, and adopt turbo-worm type reduction drive above 7.5kw agitator. TR Solids Control  innovates and reforms continuously. We are a
阅读全文